Відео

We are on our way to Florida currently stopped in Mississippi. The light started flashing 25 minutes from the hotel we are currently staying. We are also pulling a 6x12 trailer. Is it dangerous to continue driving with the blinking light ?

Curious what part of the canyonlands you explored on Part 1?

Yo! Just completed this swap which fixed all my issues except now my traction control life stays on. Not sure what I did wrong?

What size tires are those?

Should I be nervous about the airbag deploying?

Do you really need to remove the dash panel off ? Geez just for a clock spring you got remove all that ? Who came up with that idea ? Those who build cars jeeps suvs they make it so difficult so you can send it to the shop to pay them. Total joke

thanks for showing the road conditions - really helps for ppl with traditional suvs !

what month this was? I'd assume before September?

Hello thanks for making this. Do you have a working link for which clock spring you bought? Has it held up ? Thanks

Do you really need to lift the jeep up..I have a modest lift and have enough room to get under and do this install.

Thank you for this easy step-by-step guide!! So easy even I followed it and got it done with no problems.

Great drone footage!!

Were your blinkers and wipers working before you swapped out the part? Mine are not working (along with similar issues you mentioned) and I’m wondering if this part replacement would fix my problem…thanks!

Did your horn stopped working before and after replacing it did it started working again ?

Hey, thank you for showing step by step how to do this and what tools are needed. I am not the most mechanical when it comes to working on vehicles, so your video really helps give me the confidence that I can do this myself.

GET YOUR DEALER TO DO IT FOR FREE. For 2007-2011 Wranglers, there is a recall on this. Check the two NHTSA Campaign Number: 16V288000 and 13V176000. For 2011-2016 Wranglers see NHTSA Campaign Number: 16V288000. My dealership was going to charge me $1600+ for a new airbag on my 2011 Jeep Wrangler. I had to ask 3 different advisors to have the "technician" check the clockspring first. They finally checked and replaced the clock spring under the recall with no cost to me.

When was this and when is the next takeover?

My 2022 Jeep Wrangler Rubicon rear Axle locker says locked and the same light is flashing and I didn’t hit any buttons. Will this be compatible

I can't believe in a few months I'll be living minutes from this place. Awesome footage guys! Loving the content so keep it up!

Just ordered them.

Liked and subbed. Just a 2023 Gladiator Rubicon and trying to figure out what to add to it. I bought it mainly to take my grandkids for rides in the summer with the roof off. Any advice would be greatly appreciated

Just replaced mine following your step-by-step. Was pretty painless thanks to this video. Thank you!

What was your time frame for the clock spring replacement?

This made me miss Baja. Love this video!

I just picked up my '24 JLUR couple months ago, and it came with the plastic bumpers. I kind of wish I ordered the steel bumper group but at the time I didn't know I wanted a winch. I like the look of yours with the bull bar on the top and winch. I'm going to continue driving mine stock for a while before I make any big changes but I am saving this video for when I'm ready to swap out the front bits and add a winch. I think I will want a winch with the offroading I have planned...good insurance. But, I'm a little hesitant to do this work myself as I don't want to screw anything up. Hopefully I can find a local friend to help or a shop that won't rip me off.

My favorite part is 30:58 🩷 Great video! Can’t wait for pt. 2 :)

This is your best video yet. Loved all the content and information. Definitely inspired me to make a trip down there ASAP

Thank you, it's simplified.

what size tires are those?

Do you have to rotate it like that ?

Very help thank you .hope I can order from overseas

There’s a kit the provides a replacement for the drivers side cowl drop that provides Chuck and switch mount behind a cover. It looks like the charge port on the 4+e

2013 JKUR - I had my clock spring replaced (supposedly) under warranty years ago. It didn't take a long time for the steering wheel control buttons to stop working properly again. Do you think they ACTUALLY replaced it or is it possible the new one is crap too? Or is there something else that can make the steering wheel buttons work intermittently? Hate to do the clock spring job if it's not going to fix the issue. Thanks for the video. Not a bad job.

Thank you so much for this video, you saved me so much time and aggravation! Just completed this, took about a half hour with your help!

Mine just turned on when i got to work. Can i still drive it until i get it fixed ?

5:25 Holy crap dude! Again with the loud ass music? Either talk louder or lower your music volume. It's super annoying to have to adjust the volume constantly during a video. I'm not trying to be a dick. I say this to help you. Audio levels need to be - you know - LEVEL. Loud music is cool as long as your voice is just as loud. If you can't talk louder, then turn down the tunage. Your video would be 1000% better if your audio levels weren't all over the place. Great video. Fix the music volume and it'll be even better.

I think your intro music is way too friggin LOUD.

Awesome video and it help me a lot! I finished the work and replaced the part. Although it fixed the issue I intended, once I connected the battery again my check engine light and traction system lights came on (they were not on before). The scanner is giving me a U110A and U0126 codes. Any idea of what this could be???

this ended up taking me a couple of hours to do. i had to rent the steering wheel puller from the auto parts store, and i had to buy a flexible torx screwdriver thingie for $30 that came with the bit. i also had to use a dremel tool to cut a channel on both sides of the plastic cover behind the wheel to be ab le to get to the long torx screws that held it together. i got the clock spring from Jegs for $189 out the door versus $450 from my local auto parts store. thanks for making the video, it helped alot!

great vid thanks! My 2010 Unlimited Sort was caught in the rain couple times this summer and now the horn sounds for a second at ignition and shut off. Do you think it could be the clock spring? Or does that sound like a short due to corrosion? Thanks!

Thanks!

Will this part make your Acceleration shut down completely while going down the road?

Omg! Oregon looks amazing!! I need to visit soon! :)

As a long time Jeep owner/lover, I’m about at that point where I’m done with Jeep (aka Chrysler Fiat). 63k miles, I’ve had this clock spring issue, Oil Cooler housing leak, rocker arm engine tick airbag recall. Ridiculous for a vehicle with lower mileage. I’m actually afraid one day the engine will grenade because of their shitty build quality. My 2012 Toyota Tundra has 120k miles and not a single issue. No wonder the company is going downhill.

Those 4 push pins at the end… is there a way to remove without destroying?

Looks good. How is the EVO working out compared to the Zeon? Thanks

HEY, I'M EXPERINCING THIS FOR THE SECOND TIME AND HAVING THE WARRANTY WORK FIX THE ISSUE. SOON MY WARRANTY WILL EXPIRE AND I DON'T REALLY WANT TO BUY ANOTHER CAR. HAS YOUR FIX HELD AND STILL WORKING? THANKS

Does your Diode Dynamics SS3 have gaps around the bezel of the bumper or is it a flush fit? I just installed mine and it has gaps.

Thank you for the instructional video, it really helped out. 👍

To get the LP4 amber running light to aluminate did you have to use another power source besides switch 3?